Ordering Rules

Ordering Rules for Solid Wood Moulding

Specified Length Moulding Orders:

• There is a 15% upcharge for specified lengths.

• Lengths that may be specified: 8’, 10’, 12’, 14’, 16’.

• Actual lengths may be up to 6” shorter than specified lengths. If this will cause a problem for the application, it is recommended to move up to the next longest length.

• Items that total 200’ or more may have up to 30% cutbacks that could be up to 1’ shorter than the specified length.

Lineal Moulding Orders:

• Lengths may be requested, but order can contain pieces 7’ and longer.

• Finished orders will be run at 10% over the requested footage up to 100'. This is to cover any end checks or length defected after machining.

• Orders over 200’ will not be defected for knots, end check, kiln check, or wane unless specified (may be an upcharge).

Gluing Guidelines

• Orders can be specified as no gluing allowed, but there will be a 15% upcharge.

• Edge gluing is acceptable in any width on a paint grade moulding and widths greater than 5” on a stain grade moulding.

• A maximum of 1 glue line is acceptable on boards up to 7” wide and 2 glue lines on boards up to 10” wide.

• No strip within the glued-up board will be less than 1-1/2”.

• All strips within the board will be color-matched as best as possible.